Accident Beechcraft B99 Airliner N950AA, Saturday 19 May 2007
ASN logo

Date:Saturday 19 May 2007
Type:Silhouette image of generic BE99 model; specific model in this crash may look slightly different    
Beechcraft B99 Airliner
Owner/operator:Alpine Aviation
Registration: N950AA
MSN: U-159
Year of manufacture:1974
Total airframe hrs:34613 hours
Engine model:Pratt & Whitney PT-6A
Fatalities:Fatalities: 0 / Occupants: 1
Other fatalities:0
Aircraft damage: Substantial, repaired
Location:Billings-Logan Field, MT (BIL) -   United States of America
Phase: Landing
Departure airport:Billings-Logan Field, MT (BIL/KBIL)
Destination airport:Kalispell-Glacier Park International Airport, MT (FCA/KGPI)
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
A Beechcraft B99, N950AA, was substantially damaged when the nose wheel landing gear collapsed during landing roll at Billings Logan International Airport (BIL), Montana, USA. The pilot, the sole occupant in the airplane, was not injured. The pilot was flying on an activated instrument flight rules (IFR) flight plan, which had an intended destination of Kalispell, Montana.
The pilot said that he had departed from Billings, Montana, and had climbed to 12,000 feet. About 40 nautical miles northwest of Billings, he heard a "clunk" and the red unsafe light in the gear handle came on. He verified that all systems were functioning normally, and he cycled the landing gear up and down to see if that would solve the problem. The unsafe light remained illuminated. The pilot returned to Billings and circled for several hours to burn his fuel load down. He said that at one point he flew low over the runway so the company mechanic, with the aid of a light from an airport vehicle, could visually check the nose gear position. It was hanging out of the wheel well at approximately a 45-degree angle. Upon landing at Billings, the airplane settled to its nose during landing rollout.
Examination of the airplane by an FAA inspector revealed that the nose gear actuator mount bracket area was bent and wrinkled. The nose gear actuator shaft had fractured just above the clevis bolt, which attaches to the drag brace. The failed actuator had been installed on July 26, 2006. The Beech B99 maintenance manual states that the hydraulic actuator needs to be overhauled or replaced every 10,000 hours; maintenance records indicate that this one had 231.4 hours on it at the time of the accident. Metallurgists from both the National Transportation Safety Board and Hawker Beechcraft Corporation examined the failed actuator. Both concluded that all of the fractures were overstress, and no preexisting fatigue signatures were evident.

PROBABLE CAUSE: "The total failure of the nose landing gear actuator and the subsequent nose gear collapse during landing."

Accident investigation:
Investigating agency: NTSB
Report number: SEA07LA133
Status: Investigation completed
Duration: 9 months
Download report: Final report


NTSB id 20070703X00870


Revision history:


The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314